There are two ranges of sounds. One is the high range sound and the other is the low range sound. The high range sounds can be handled at speakers in the rear end, dash and door panels of the vehicle. But the lower tones and the bass effects are generally handled by the sub woofer which has got no other substitute. One should ensure that the sub woofers are wired properly. But how to wire dual sub woofer?

The process is very simple and easily followable. The process will obviously require woofers. The amplifier will be connected to the subwoofers using speaker wires. The following paragraphs will discuss on the steps involved in this process.

There are a variety of woofers available in the present day markets.The subwoofers differ in their resistances. Of these types of woofers, resistance of 2-ohm and resistance of 4-ohm are found to be common. The procedure which is discussed below is given for the 4-ohm type of subwoofer.

An amplifier will have two channels. One subwoofer has to be connected to each of these channels. But before connecting remove the insulation from the end of the wire. About 0.5 inch of insulation has to be removed for making the connection. Connect the wire from the positive terminal from the right channel of the amplifier to the positive terminal of the sub. Now connect the negative terminal from the right channel of the amplifier to the negative terminal of the sub. Now repeat these steps to the left channel of the amplifier.

The positive wires are then connected to the positive terminal and in the same way the negative terminals connected with the negative wires. That is in general corresponding connections between sub woofer input and the amplifiers are made. These steps are repeated with the amplifier’s left channels and the second sub woofer.

The second method for wiring a sub woofer is to wire a dual subwoofer to a single channel amplifier. Now remove about 0.5 inch of insulation from the ends of the wire. Now take the wire from the positive terminal of the amplifier is connected to the positive terminal of the first sub woofer. Now take the second wire from this terminal and connect it to second sub. Repeat this step with the negative terminals. This method of wiring is termed as “daisy-chaining”.

Check your sub woofers by playing a track of your choice. If you feel that the bass is not good enough check for all the wiring so as to ensure that there is no wrong connection made between negative and positive. Such a wrong wiring may lead to poor sound quality and also make it play out of phase. This should be avoided.

We must realize the fact that people look for the exact feel of music. Music is used to treat certain kinds of diseases. In these cases even a small disturbance may bring a lot of effect on the individual. Modern technology has made components which will make even the most lowest level of music to be heard crystal clear. Subwoofer comes under such an invention which will make us hear the bass types of music. Thus this article on how to wire dual woofers will be very useful for beginners who are in need of it.

Learn more about Auto. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.

For information on Auto Shipping visit MetroGistics.