The two main factors affecting the performance of a audio system are volume and the quality of sound that it produces. In a car stereo system, the perfect quality can be achieved only when the stereo system is connected to the amplifier. The most common thought among people is that amplifiers increase the sound alone but they also increase the overall quality of the sound coming from the stereo system. But how to connect an original car stereo to an amp?

There are few tools which are found useful in connecting an original car stereo to an amp. It includes speaker wire, rubber grommets, wiring harness adapter, amplifier wiring kit, drill, Philips head screw driver, trim panel tool, rubber spacers.

First of all the negative cable has to be disconnected from the battery. This cable gives the connection between the negative lead and the vehicle. The clamp of the cable is removed using a screw driver .It is left undisturbed until the process is completed.

With the help of a Philips screw driver the positive lead cable is connected to the ring terminal of the amplifier. Before being connected to the amplifier the fuse is removed from the ring terminal. A hole is drilled into the engine compartment’s firewall. Through this hole only the power is supplied to the amplifier location from the car battery. The wiring protection is important and for that one must use a rubber grommet for covering that hole.

The stereo is removed as per the manual instructions. It is kept in reach to the wiring. The wirings are removed and connected to the harness adapter with the help of plastic binders. The codes on the adapter will guide for the connections. The stereo is then connected to the adapter.

The cables are drawn to the amplifier location. The panel protecting the carpeting is removed using a panel tool. Now the cables are placed below the carpeting and our hands are used in the place of the panels. The cables used for power supply are drawn starting from the battery up to the amplifier. Then the cables and the leads are connected to amplifier.

The wires are connected to the speakers from the amplifier. This is done with the help of the instructions given in the manual of the car. The stereo is placed on the dashboard of the car. The fuse is inserted in the socket. The negative cable of the battery is reconnected. The clamps need to be tightened properly with the help of a screw driver. This clamps need to be in proper position which will avoid it to be loosened or moved by using one’s hand.

One should know how to connect an original car stereo to an amp, this will enhance the effect of the music.

Want to find out more about Car Hifi, then visit Author Name’s site on how to choose the best Car Audio for your needs.

For information on Auto Shipping visit MetroGistics.