How to Remove the Radio From a Mazda 6? Mazda six is one of the most popular cars available in the market all over the world. Mazda six comes with a default factory audio system. This system is of very high quality and performance. There is no need to change the audio system in this car. But still people do change it to upgrade their audio system to have powerful stereo and speakers. In particular youngsters are mad about powerful audio system and speakers. So, in order to upgrade your default audio system in Mazda six car you have to first remove the default stereo present in it. If you go to a mechanic or an engineer they may demand you big amount of money. You can save money and your time by doing this work on your own.
For completing this task you will require a socket wrench, pliers and a screw driver.
The things you will be in need are pliers, screw driver and socket wrench. Make sure you have screw drivers of different sizes. If you do not have screw drivers of different size then you may be stuck in the middle. Make sure all these things are ready before starting your work to avoid unnecessary wastage of time.
The next thing is to remove the shift knob of the gear. The knob can be removed by twisting it in the counter clockwise direction. The center of the console can be snapped off. Then, the cupholder is removed by grabbing on it. This console generally extends in to ashtray of the car. Once the console is removed, there are two other screws that become visible. Remove these screws. It is actually below the panel of climate control.
The glove compartment is opened to gain access to the side-mounted bold of the radio. The sides of this compartment are squeezed simultaneously, and are made to be dropped down. Once this is done, the screws that are seen can be removed.
You will find that the radio and the climate control are mounted on the same assembly. Loosen the entire assembly so that the whole setup can be removed. The air vent covers are included in the panel. Remove this cover. Turn the cover upside down. There will be twelve screws located on the cover. These screws are responsible for mounting the climate and the radio controls. Remove all the 12 screws with the help of a screw driver. Once all the screws are removed, the radio can be removed from the car.
After the radio is removed, do the above steps in the reverse order to assemble the parts. The dash is placed and all the screws are screwed back. The gear is then shifter in to the park mode. The battery of car is again reconnected. The negative wire is again placed on the battery and tightened.
With the help of this article you would have learnt how to remove the radio from a mazda6. Follow the steps and enjoy the music with your new customized radio.
Looking to find the best deal on Radiohalterung, then visit www.powernetshop.at to find the best advice on radio dash kits for you.
Other Automotive News on the Web
There are no responses yet