This article lists all the things that are required for installing the amp kit and the instructions to install an amp kit. The things that are required are adjustable wrench, drill, screw driver, soldering gun and wire stripper. The battery is first disconnected before starting any wiring work. It is disconnected by detaching the negative terminal first followed by the positive terminal.

The panels present in the doors must be first loosened. This can be done by loosening the screws around it. Bring the power cable close to the fuse as near as possible. Then pull the other end out through the hole and put it under the carpet and then connect it to the panel.

The end of the power wire is hold nearest to the fuse holder which is under the hood. The other end of the power wire is fed into the hole drilled in the heat shield. The wire is fed continuously along the side of the car till the rear seats are reached. The wire is further fed under the rear seats through the small gaps till it reaches the trunk. From the trunk the wire is taken to the positive terminal of the amplifier. End of the wire is stripped and it is connected to the positive terminal of the amplifier.

The bolt present under the carpet is spotted then it is unscrewed and then connected with ground wire. The connection can be made very secure by soldering the two wires. Now the ground wire is connected to the amplifier’s negative terminal. To ensure safe connection between the wires, the screws are tightened well.

Next the connections with the RCA wires are done. These connections are done with the help of the color code in the wires. Hiding the wires is an important thing so all the wires are kept below the car’s carpet.

Take out the fuse which is present in the fuse holder. Power wire connection with the positive terminal is made correctly . To do this we need to remove and then again attach the terminal nut. The terminals are connected with the corresponding posts that is positive terminals with positive posts and negative terminals with negative ones. In the final step the fuse is put back into the holder Now let us look tips and warnings . If there are present in the fire wall there will be no necessity for drilling . Before installing an amp kit we need to check out the power needs and if amp kit can meet those power needs or not. Inserting the fuse back into the holder should be done only when all steps are completed that is only when all the wiring connections and attachments are made perfectly. Now the installed amp kit is ready to operate.

Thus we have learnt How to install an amp kit from this detailed article.

Want to find out more about Car Hifi, then visit Author Name’s site on how to choose the best Car Audio for your needs.

For information on Auto Shipping visit MetroGistics.

There are few tools which are found useful in connecting an original car stereo to an amp. It includes speaker wire, rubber grommets, wiring harness adapter, amplifier wiring kit, drill, Philips head screw driver, trim panel tool, rubber spacers.

First of all the negative cable has to be disconnected from the battery. This cable gives the connection between the negative lead and the vehicle. The clamp of the cable is removed using a screw driver .It is left undisturbed until the process is completed.

With the help of a Philips screw driver the positive lead cable is connected to the ring terminal of the amplifier. Before being connected to the amplifier the fuse is removed from the ring terminal. A hole is drilled into the engine compartment’s firewall. Through this hole only the power is supplied to the amplifier location from the car battery. The wiring protection is important and for that one must use a rubber grommet for covering that hole.

The stereo is removed as per the manual instructions. It is kept in reach to the wiring. The wirings are removed and connected to the harness adapter with the help of plastic binders. The codes on the adapter will guide for the connections. The stereo is then connected to the adapter.

The cables are drawn to the amplifier location. The panel protecting the carpeting is removed using a panel tool. Now the cables are placed below the carpeting and our hands are used in the place of the panels. The cables used for power supply are drawn starting from the battery up to the amplifier. Then the cables and the leads are connected to amplifier.

The wires are connected to the speakers from the amplifier. This is done with the help of the instructions given in the manual of the car. The stereo is placed on the dashboard of the car. The fuse is inserted in the socket. The negative cable of the battery is reconnected. The clamps need to be tightened properly with the help of a screw driver. This clamps need to be in proper position which will avoid it to be loosened or moved by using one’s hand.

One should know how to connect an original car stereo to an amp, this will enhance the effect of the music.

Want to find out more about Car Hifi, then visit Author Name’s site on how to choose the best Car Audio for your needs.

For information on Auto Shipping visit MetroGistics.

There are few tools required for doing this process. It includes pliers, 2 car audio amps, wire strippers, wrench, wire rated for the amplifiers. These tools will help in the accomplishment of task in a simpler way and easier way too.

The first step to be done before performing the task is to thoroughly check the manuals of both the amplifiers given by the manufacturer. Only the amplifiers which has got same characteristics like power etc can be bridged. If amplifiers with different power rating are bridged it may lead to malfunction or even damage to the amplifiers. Thus one should ensure that both these amplifiers have same power rating. In case there is any doubt of performing the task or in determining the match among the two it is better to drop the idea of bridging them both.

Then the supply of power is cut from the two amplifiers. This is done by removing the cable from the positive end of the battery of the car with the help of pliers or wrench. It can remain in such a way till the amplifiers are completely bridged.

While buying an amplifier please do check for the presence of the bridge switch. In most amplifiers it is present at the back edge of the amplifier which can be easily spotted. If it is not in bridge mode set it back to that mode. In the next step inch insulation is stripped off from the wire at both ends.

The most important thing to be done is the connection of the wires. The positive terminal of one amplifier holds one end of the wire while the other end is held by the negative terminal of the other amplifier. This can be performed by wrapping them around its corresponding terminal and then screwing them down. There is a clear distinction between the positive and negative terminals which is given by its color difference where red indicates positive and black indicates negative terminal.

The last step is to make the connections complete. Now we have to connect the amplifiers to the speakers. Only one terminal either positive or negative is used for connection with the wire. The other terminals of amplifiers which are free should be connected with the terminals on the speaker. Always ensure that we connect positive terminals of speakers and amplifiers together and negative terminals of speakers and amplifiers together. The speaker system now has improved sound after bridging of amplifiers . Browse through web sites like ehow com for further free tips.

This article would have proved to be effective in guiding us on How to Bridge Two Car Audio Amps by instructing and explaining all steps with useful suggestions and tips.

Want to find out more about Car Hifi, then visit Author Name’s site on how to choose the best Car Audio for your needs.

For information on Auto Shipping visit MetroGistics.